Subject: Infiltration Data
If you are using Non linear Reservoir Modeling in SWMM 5 there are
1. Five parameters for Horton Infiltration,
2. Three parameters for Green-Ampt and
3. Two parameters for CN infiltration, one parameter (conductivity) has been deprecated by the EPA in SWMM 5. The Drying Time is used to regenerate the Infiltration Rate for continuous simulation. Only two parameters are now used for CN infiltration: The CN value itself and the drying time.
|
Autodesk Technologist with Information about Stormwater Management Model (SWMM) for watershed water quality, hydrology and hydraulics modelers (Note this blog is not associated with the EPA). You will find Blog Posts on the Subjects of SWMM5, ICM SWMM, ICM InfoWorks, InfoSWMM and InfoSewer.
Thursday, July 21, 2011
Infiltration Data in SWMM 5
Subscribe to:
Post Comments (Atom)
Today is day 356 or 97.5 percent of the year 2024
English: Today is day 356 or 97.5 percent of the year 2024 Mandarin Chinese: 今天是2024年的第356天,即97.5% Hindi: आज 2024 का 356वां दिन या 97.5 प्रत...
-
@Innovyze User forum where you can ask questions about our Water and Wastewater Products http://t.co/dwgCOo3fSP pic.twitter.com/R0QKG2dv...
-
Subject: Detention Basin Basics in SWMM 5 What are the basic elements of a detention pond in SWMM 5? They are common in our back...
-
Soffit Level ( pipe technology ) The top point of the inside open section of a pipe or box conduit. The soffit is the ...
No comments:
Post a Comment