Subject: How to Make a Small Model out of a Large Model in H2OMAP Sewer
The process is easy if you use Domain and Facilities.
Step 1. Use the Trace Upstream Network Command in Utilities to find the upstream network from your node of interest. The upstream network is saved to a Domain.
Step 2. Use the Facility Manager to 1st deactivate the whole network and then 2nd to add the Domain to your Facility or the nodes and links that you will simulate
You now have a smaller network to examine in Detail. You may have to make a temporary Outfall node to run the model if there are no Outfalls in the model.
|
Autodesk Technologist with Information about Stormwater Management Model (SWMM) for watershed water quality, hydrology and hydraulics modelers (Note this blog is not associated with the EPA). You will find Blog Posts on the Subjects of SWMM5, ICM SWMM, ICM InfoWorks, InfoSWMM and InfoSewer.
Showing posts with label How to Make a Small Model out of a Large Model in H2OMAP Sewer. Show all posts
Showing posts with label How to Make a Small Model out of a Large Model in H2OMAP Sewer. Show all posts
Tuesday, July 12, 2011
How to Make a Small Model out of a Large Model in H2OMAP Sewer
Subscribe to:
Posts (Atom)
Today is day 356 or 97.5 percent of the year 2024
English: Today is day 356 or 97.5 percent of the year 2024 Mandarin Chinese: 今天是2024年的第356天,即97.5% Hindi: आज 2024 का 356वां दिन या 97.5 प्रत...
-
@Innovyze User forum where you can ask questions about our Water and Wastewater Products http://t.co/dwgCOo3fSP pic.twitter.com/R0QKG2dv...
-
Subject: Detention Basin Basics in SWMM 5 What are the basic elements of a detention pond in SWMM 5? They are common in our back...
-
Soffit Level ( pipe technology ) The top point of the inside open section of a pipe or box conduit. The soffit is the ...