Showing posts with label InfoSWMM CONOUT.dbf File in ISDB Folder. Show all posts
Showing posts with label InfoSWMM CONOUT.dbf File in ISDB Folder. Show all posts

Sunday, March 19, 2023

InfoSWMM CONOUT.DBF File in ISDB Folder

InfoSWMM CONOUT.DBF File in ISDB Folder

Column HeadingDescriptionExample
IDAn identification number or code for the data.001
FLOWThe flow rate or volume of fluid passing through a section.50 m³/s
FLOW_CLASSA classification of the flow rate.High
DEPTHThe depth of fluid in a section.5 meters
HGLThe hydraulic grade line or energy grade line for a section.10 meters
VELOCITYThe speed or velocity of fluid passing through a section.3 m/s
VOLUMEThe volume of fluid passing through a section over a given time.5000 m³
FROUDE_NUMThe Froude number, a dimensionless number used to describe the flow regime of a fluid.0.5
CAPACTY_DDThe capacity of a drainage or sewer system in dry weather conditions.100 m³/hour
SURCHGE_DDThe amount of surface water or stormwater runoff in dry weather conditions.10 m³/hour
VELOCDEPTHThe velocity of fluid at a given depth.2 m/s
TOP_WIDTHThe top width of a section.10 meters
MAX_VELOCThe maximum velocity of fluid passing through a section.5 m/s
MXFUL_FLOWThe maximum flow rate or volume of fluid that a section can handle.100 m³/s
MXFLOW_CLSA classification of the maximum flow rate or volume.Very High
MXFUL_DEPTThe maximum depth of fluid in a section.10 meters
MXTOP_WIDHThe maximum top width of a section.20 meters
RESERV_CAPThe reserve capacity of a drainage or sewer system.20%
FLOW_VOLThe volume of fluid passing through a section.10000 m³
OVER_FF_TMThe amount of time a section is in overland flow.2 hours
CAP_LTD_TMThe amount of time a section is at capacity.1 hour
UP_OFFSETThe offset or elevation difference between a section's upstream and downstream ends.5 meters
DN_OFFSETThe offset or elevation difference between a section's downstream and upstream ends.3 meters
LENGTHThe length of a section.100 meters
FRICTIONThe friction coefficient or friction factor for a section.0.02
SLOPEThe slope or gradient of a section.0.01
MAX_DEPTHThe maximum depth of fluid in a section.12 meters
FULL_FLOWThe flow rate or volume of fluid that fills a section to capacity.80 m³/s



Reasons for ICM SWMM inside of ICM alongside of ICM InfoWorks Networks

ICM SWMM vs. SWMM5 ICM SWMM directly uses the EPA SWMM5 engine, making it functionally equivalent to SWMM5 in terms of calculations and perf...