Autodesk Technologist with Information about Stormwater Management Model (SWMM) for watershed water quality, hydrology and hydraulics modelers (Note this blog is not associated with the EPA). You will find Blog Posts on the Subjects of SWMM5, ICM SWMM, ICM InfoWorks, InfoSWMM and InfoSewer.
One of the limitations of using Dry Weather Flow (DWF) in SWMM 5 and InfoSWMM is that the same DWF pattern is repeated every 24 hours for either a Weekday or Weekend. This pattern can be changed by multiplying by the Daily and/or Monthly pattern but the same core hourly pattern stays the same. There is an alternative, however, and the alternative is to use a time series over a period of days or weeks that matches either your monitored data or a weekly dry weather pattern.
Here is an example of how this is used. The base DWF pattern is over a 24 hour period (Figure 1). The two day result is copied from the InfoSWMM report manager and applied as a multiple day pattern in the time series editor (Figure 2). The Scenario Manager of InfoSWMM allows two runs: (1) DWF Pattern only and (2) DWF Pattern + Time Series for Two Days (Figure 3). The Output Report Manager of InfoSWMM shows that the Inflow Time Series + DWF is twice the DWF only (Figure 4). It shows that the the multiple day pattern is the same as the DWF pattern for two days.
Figure 1. DWF Pattern for 24 hours at one hour intervals.
Figure 2. DWF Pattern Applied or Copied to the Time Series Editor.
Figure 3. Two Scenarios in InfoSWMM to show DWF Only and DWF + Inflow Time Series
Figure 4. The end result in the InfoSWMM Output Report Manger is twice the DWF due to the Hourly DWF Pattern + The Inflow Time Series at the Node.
Flushing toilets enable most Americans to make their own waste disappear as if by magic, but most would be hard-pressed to answer this simple question: When you flush, where does it go?
Septic tank owners, about 20 percent of Americans, are most likely to be able to give an accurate answer, because they’re responsible for the maintenance of their own sewage-disposal systems. A flush from one of their toilets sends wastewater to a tank buried on their property, where the waste products separate into solid and liquid layers and partially decompose. The liquid layer flows out of the tank and into a drainfield that disperses it into the soil, wherenaturally occurring microbes remove harmful bacteria, viruses, and nutrients. The solid layer stays behind in the form of sludge that must be pumped out periodically as part of routine maintenance. If the tank is properly designed and maintained, those bacteria, viruses, and nutrients stay out of groundwater and surface water that people may use for drinking water, and they never reach surface water bodies where people swim or boat.
The vast majority of the 80 percent of Americans who don’t use septic tanks are served by municipal water-treatment plants. Waste from their homes is whisked immediately off the premises, never to be seen, smelled, or considered again. Pipes carry waste from these homes to wastewater-treatment plants that, in some ways, work like a septic tank on a very large scale.
Just as in a septic tank, the solid and liquid wastes are separated first in a process known as primary treatment. Next, as in a septic tank’s drainfield, bacteria break down contaminants in a process called secondary treatment. After that, treatment with chlorine kills the remaining bacteria. Then, in some communities, special treatment technologies remove contaminants that are of special concern, such as phosphorus or nitrogen. When the process is complete, the treated waste meets regulatory standards and is released to a nearby water body—that is, if all goes well. If all doesn’t go well—perhaps the treatment plant suffers an outage or there’s more waste than the plant was designed to treat—untreated waste can be released to surface water.
As treatment plants age across the United States and as the country’s population grows, these releases are becoming more problematic, contributing to the serious surface-water problems that crop up frequently in the news. Harmful algal blooms like the one that cost Toledo, Ohio, its drinking waterlast summer, fish kills like the one recently reported off Long Island, and the much-discussed dead zone in the Gulf of Mexico are all fed by phosphorus, nitrogen, and other contaminants found in the untreated sewage that, according to EPA estimates, flows out of America’s treatment plants during the23,000 to 75,000 sanitary-sewer overflows that happen per year. The causes of these water-quality issues are complex, because the same pollutants can be washed into surface water from agricultural land, industrial sites, and fertilized lawns dotted with pet waste, but the 3 to 10 billion gallons of untreated waste released from our sewage-treatment plants per year cannot help but have an impact.Specifically, they affect the water you swim in and the water you drink.
* * *
A number of studies, including this one from 2010, have found that emergency room visits for gastrointestinal distress increase after a heavy rain. These illnesses are believed to spike after a storm because rainwater washes pathogens into lakes and rivers used for recreation and drinking water. A 2015 study published in Environmental Health Perspectives goes a step further than earlier research by pointing to a common type of municipal sewage-treatment system, combined-sewer systems, as an important factor in these illnesses.
The EPA has called overflows from combined sewer systems “the largest category of our Nation’s wastewater infrastructure that still need to be addressed,” affecting Americans in 32 states, including the District of Columbia. The agency has been working with municipal water systems to address the problem for decades and much progress has been made, but to understand why it’s taking so long, you have to consider history. You also have to consider the massive costs that come with making changes to public works that have served millions of people for more than a century.
Combined sewers collect human waste, industrial waste, and stormwater runoff into a single pipe for treatment and disposal. (In other municipalities, these waste streams are handled separately.) In dry weather, a combined sewer ordinarily carries a relatively low volume of waste, delivering it to publicly owned treatment works, or POTWs for short, that are designed to handle that flow. In plain terms, when a combined sewer system is functioning properly, you can generally trust that when you flush, the contents of the toilet bowl end up where they’re supposed to go.
USEPAThings change when it rains in communities served by combined sewers. Because a combined system must handle surges of stormwater, rainfall markedly increases the volume of waste that its equipment must handle, making this type of sewage system particularly likely to overflow into surface water. As these diagramsshow, they were designed to do this as a fail-safe for system failures that were intended to be rare but aren’t any longer. If you’re accustomed to a faint smell of sewage in the streets after a rainstorm, these diagrams will show you why.
Unfortunately, the receiving waters for these rain-induced spills are sometimes the same water bodies that are used for drinking water, and sometimes people swim there, too. And sometimes the overflow is so significant that the stormwater-and-sewage mixture backs up into the streets where people walk. Is it any wonder that rainy weather often triggers a spike in stomach bugs and beach closures?
* * *
Given what’s at stake, why are upgrades to aging systems taking so long? Consider this map of the 772 American communities with combined-sewer systems.
Most combined systems are concentrated in the older cities of the Northeast and the Great Lakes region, but they also exist in other older cities as far-flung as Atlanta, Memphis, and San Francisco. In other words, the systems that pose risks today happen to be the ones—state-of-the-art when they were built, but not today—that are in some of the biggest cities in America, which have acombined population of approximately 40 million people.
If you’re feeling relieved to see that your hometown isn’t marked on the map, remember that fecal-coliform bacteria don’t always stay close to home. Waste spilled into the Ohio River affects everyone down the Ohio and the Mississippi, and it contributes to the ongoing woes of the Gulf of Mexico. Even if you don’t live in the Northeast, along the Ohio, in the Great Lakes region, along the Mississippi, or on the Gulf Coast, bear in mind that 40 percent of the commercial seafood caught in the continental U.S. comes from the Gulf of Mexico. In other words, when Cincinnati’s sewer system overflows into the Ohio, it intrudes into the food chain of a lot of people.
* * *
The EPA calls combined sewers “remnants of the country's early infrastructure.”The first sewers weren’t designed to handle the constant and huge stream of wastes from our toilets, because they were invented when we didn’t have any toilets. Sewers were originally built to solve the problems of cities that were flooded with their own refuse—garbage, animal manure, and human waste left in the open rather than in a privy or latrine—during every rainstorm. To prevent that flooding, the fouled stormwater was shunted out of town and into the nearest handy receptacle, which was often a lake, river, stream, or ocean.
When flush toilets became common in the mid-1800s, they were piped into these existing sewers, introducing much more human waste, as well as a large volume of water that had never been there before. In some ways, this was a design feature, not a bug, because the burst of stormwater flushed out pipes that might have otherwise gotten clogged. This flush of rainwater also diluted the waste before it hit a nearby river.
In time, though, dilution wasn’t enough to keep waterways safe and attractive, and sewage treatment plants were invented to clean up the waste stream before releasing it to water bodies. Newer cities, which were starting from scratch, generally handled stormwater separately from human and industrial wastes from the start, but cities whose sewer systems had always been combined continued to treat both waste streams together.
As the older cities grew larger, their combined-treatment systems struggled to keep up, and growing populations weren’t the only factor. Time itself exacerbated their woes. In Hoboken, for example, some sewer lines date back to the Civil War. Common sense says that pipes that have been buried for a century and a half tend to leak. Over time, they also get clogged with debris or even congealed cooking oil, resulting in narrowed pipes that overflow even more easily. When narrowed pipes are already overloaded, the added influx of stormwater when it rains becomes just too much water. Now, some cities experience overflows with less than a quarter-inch of rain, with resulting risks to human health. It is common for cities with combined-sewer systems to advise citizens to stay out of the water for days after any rainfall. And now the Environmental Health Perspectives study suggests that after a very heavy rain, those overflows may be affecting their communities’ drinking water, too.What is being done? Combined sewers have been an EPA priority for many years and, after decades of significant effort, the numbers are starting to move in the right direction, but this is not a problem that can be turned around quickly or cheaply. New York City’s combined sewers are still the single largest source of pathogens to the New York Harbor system, according to the New York Department of Environmental Protection. A single 2014 storm triggered a release into Lake Erie from Detroit, Michigan, of more than 44 million gallons of raw sewage from sanitary sewers and almost 3 billion gallons from combined sewers, and such releases from Detroit and the other cities with sewer outfalls on Lake Erie contribute to the fact that it blooms with algae every summer. Last summer, one of those algal blooms cost Toledo its drinking water for two days, and this year’s harmful algal blooms were projected to be even worse than last year’s.
As with any engineering project, the benefits of reducing overflows to zero—an effort estimated by the EPA in 2004 to cost $88.8 billion—must be weighed against its cost.
“We mustn’t forget the hugely successful effort in the 1970s and 1980s to provide secondary treatment at virtually every sewage-treatment plant in the country,” said Wayne Huber, a professor emeritus of Civil and Construction Engineering at Oregon State University. As an example, he describes what happened in Portland, Oregon, where a system of tunnels now contains 90 percent of the city’s stormwater surges. “Portland spent about $500 million on its deep tunnels and pumping system,” Huber said. “This has reduced the number of releases into the Willamette River from maybe 50 to 100 per year to five to ten per year.”
Huber also highlights Philadelphia’s “green technology” strategy to reduce overflows to the Delaware and Schuylkill rivers. Since avoiding massive construction is often synonymous with avoiding massive expenditures, Philadelphia’s use of approaches like rain gardens and green roofs to divert stormwater from the waste stream going to its treatment plants could serve as a model for other municipalities struggling with the same problems.
Huber cautions against relying on a single approach, saying that “green technology seeks to avoid large investments in infrastructure by keeping stormwater out of the combined sewer in the first place, but in heavily urbanized areas that is seldom an option, hence the massive storage projects that we see in cities like Chicago.”
On the individual level, people concerned about wastewater can give some thought to the fertilizer, pesticides, trash, and animal waste that wash off of lawns and into sewer systems, lakes, rivers, and oceans. As citizens, they can also advocate at local, state, and federal levels for improvements. People can reduce stormwater flow by planting their own rain gardens and green roofs—and by being judicious about the way they water our lawns and wash their cars. Sometimes, doing the right thing is as simple as being careful about what goes into storm drains and toilets.
After hearing about the plume of sewage, littered with used condoms and tampons, that emanated from Philadelphia’s sewer outfalls prior to the city’s upgrade, it’s hard to look at flushing the toilet the same way. If Americans want to be able to drink tap water or swim at beaches after it rains, they have to keep trying to improve wastewater infrastructure, even if the size of the problem boggles the mind. This post originally appeared on The Atlantic.
Subject: Qfull in SWMM 5 for various levels of y/yFull in a Circular Pipe
Here is a table that shows the value of Q/Qfull for various levels of y/yFull or d/D in SWMM5. The full flow if you loop off the top of a circular pipe at the 0.83 level would be about 1.01 times Qfull for the whole pipe. Figure 1 shows how the flows are calculated at various values, Table 1 and Figure 2 show the values of a/aFull, r/rFull and q/qFull for various values of y/yFull.
Figure 1. How Qfull and Qmax are calculated in SWMM 5 based on the roughness, slope and a lookup table for area and hydraulic radius for a circular pipe.
Figure 2: A/Afull vs y/Yfull for a circular pipe
Table 1. Table of y/yFull and Q/Qfull based on a/aFull and r/rFull
The Junction Graph variables for 2D Depth, 2D Speed, 2D Froude Number, 2D Unit Flow, 2D Inflow, 2D Volume and 2D Angle for a InfoSWMM 2D simulation for up to 1000 years can be plotted in the Report Manager of InfoSWMM. This is an image of the 2D inflow over a 10 year period (A), all seven graph variables (B) for the mesh triangle associated with the 1D node (C). The 2D inflow is + for flow out of the node to a mesh triangle and – for flow from the mesh triangle to the 1D junction.
학생 실습 경험을주는 목표로 업계 최고의 InfoWater과 InfoSWMM 무료 학생 에디션, 더 나은 업계 준비 인력을 준비하고 미래를 형성
Innovyze 호텔은 무료 수상 대학 전 세계에 GIS 중심의 물 모델링 소프트웨어
학생 실습 경험을주는 목표로 업계 최고의 InfoWater과 InfoSWMM 무료 학생 에디션, 더 나은 업계 준비 인력을 준비하고 미래를 형성
브룸 필드, 콜로라도, 미국, 2015년 8월 4일
지속적으로 수자원 공학 교육의 기준을 높이고 학습의 세계를 확대 약속을 이행, Innovyze, 비즈니스 분석 소프트웨어 및 스마트 젖은 인프라 기술의 선도적 인 글로벌 혁신는 오늘 업계 최고의 GIS 중심의 물을 발표했다 전 세계 고등 교육 기관에서 학생 및 교수에 폐수 모델링 소프트웨어 무료. 모두의이 특별한 학생 판 InfoWater 및 InfoSWMM 육십 링크에 한한다는, 자신의 교실과 실험실에서 고급, 고성능 물 모델링 소프트웨어를 사용하는 간단하고 유연한 방법으로 전 세계적으로 대학을 제공하도록 설계되었습니다. 그것은 학생들이 배우고 그들을 고용 시장에서 눈에 띄는 데 도움이됩니다 중요한 설계, 계획, 운영의 기술과 지속 가능한 물 분배 및 폐수 / 우수 수집 시스템의 관리를 개발하는 데 도움이됩니다.
Innovyze는 토목 공학의 학생들이 학업과 전문 엔지니어링 경력을 위해 준비 할 필요가 있음을 잘 알고 있습니다. 학생과 전문가, 실무 경험을 대신 할 존재하지 않는다. 이 알고, 점점 더 많은 대학은 학생들이 교실마다 그들은 그것을 필요로 어디에서 사용되는 최신 상태 및 실제적인 도구에 액세스 할 수 있도록한다. Innovyze 기술을 주위에 자신의 학부 및 대학원 과정을 맞춤으로써, 공학 교수진은 자신의 학생들이 교실에서뿐만 아니라 succeed- 할 필요가 스마트 수자원 모델링 기술의 강력한 도구 및 최신 기술에 직접 액세스 할 수 있도록하고 있습니다 보장 할 수 있지만, 궁극적으로 전문 엔지니어있다.
"Innovyze InfoWater 과 InfoSWMM 소프트웨어가 세계 최대의 물과 폐수 유틸리티와 탑 엔지니어링 회사의 많은 표준이있다 "스콧 요스트 박사, 체육, 켄터키 대학에서 토목 공학 부교수는 말했다. "나는이 소프트웨어는 최고의 공과 대학에서 사용되는 것을 볼 수 있습니다. 학생 분석 및 설계 통합 문서는 또한 우수하다. 이 미션 크리티컬 기술 훈련 및 교육을 갖는 것은 고용주에 대한 학생들의 전문성을 검증뿐만 아니라 보람있는 직업을 위해 그들을 준비에 큰 자산입니다. "
는 ArcGIS ESRI (, 레드 랜드, 캘리포니아) 꼭대기에 지어진 InfoWater 업계에서 반환의 가장 높은 속도를 제공하는 -의 혁신적인 네트워크 모델링 기술은 유틸리티 인프라 관리 및 보호의 모든 측면을 해결합니다. 이 소프트웨어는 완벽하게 강력한는 ArcGIS 설정에서 직접 정교한 예측 분석, 시스템 역학 및 최적화 기능을 통합합니다. 압력 구역 관리 및 첨단 유전자 알고리즘과 입자 떼 최적화 화재 흐름과 동적 수질 시뮬레이션, 밸브 중요도 및 에너지 비용 분석에서, 스위트는 모든 물 유틸리티 소유자 사업자가 장착되어 가장 계획, 설계, 운영 할 필요가 안전하고 그 배포 시스템 서스테인.
InfoWater는 또한 고급 스마트 네트워크 모델링, 동작, 자본 계획 및 자산 관리 확장을위한 기본 플랫폼 역할을한다. 이러한 중요한 응용 프로그램 중에는 IWLive (실시간 운영 및 보안) InfoWater UDF (단방향 플러싱) CapPlan (리스크 기반 자본 계획) InfoMaster 및 InfoMaster 모바일 (자산 무결성 관리 및 상태 평가) InfoWater MSX (다중 종 모델링) InfoWater BTX (이벤트 / 입자 되돌아) InfoSurge (서지 / 과도 해석), 지속 가능성 (탄소 발자국 계산) BalanceNet (실시간 에너지 관리 및 운영 최적화) PressureWatch (실시간 네트워크 유압 무결성 모니터링) QualWatch (실시간 네트워크 수질 무결성 모니터링) SCADAWatch (실시간 비즈니스 인텔리전스 및 성능 모니터링) DemandWatch (물 수요 예측) 및 DemandAnalyst (실시간 물 수요와 낮의 패턴 추정).
전체는 ArcGIS 중심 도시 배수 모델링 솔루션으로서, 전 기능 InfoSWMM의 분석 및 설계 프로그램은 업계에서 복귀 최고 속도를 제공한다. 수질 평가, 오염 예측, 퇴적물 수송 및 증착, 도시 홍수, 실시간 제어 및 기록 유지 등의 관리 기능에 대한 분석 및 설계에서 - - 전형적인 하수 시스템의 모든 작업은 하나의 완벽하게 통합 된 지구 공학에서 해결 환경. 이 프로그램의 강력한 유압 및 수질 계산 엔진은 USEPA에 의해 승인 및 FEMA에 의해 인증 된 최신 SWMM 5.1.010의 향상된 버전을 기반으로합니다. 생산성 향상, 비용 절감, 높은 정확도, 더 나은 효율성 및 개선 된 디자인 번역 장점 - 이러한 기능과 더 향상된 모델링 경험과 표시 결과의 더 현실감을 제공합니다.
InfoSWMM는 또한 고급 모델링, 운영 문제, 단기, 장거리 및 자본 계획, 도시 우수 처리 및 분석, 분석 중심의 자산 관리 확장을위한 강력한 플랫폼 역할을한다. 이러한 중요한 응용 프로그램의 일부는 다음과 같습니다 InfoSWMM 2D (이차원 표면 홍수 모델링), CapPlan (리스크 기반 자본 계획 및 자산 성능 모델링), InfoSWMM는 서스테인 (최적의 선택과 뚜껑의 배치 / BMPs에)를 InfoSWMM SFEM (동적 하수 흐름 추정을 모델), InfoMaster (GIS 중심의 분석 중심의 자산 관리) 및 RDII 분석 (강우에 의존 유입과 침투 계획 및 분석).
포괄적 인 학생 설계 및 분석 워크 북은 각 프로그램에 포함되어 있습니다. 배경 이론에 더하여, 통합 문서 단계별 물 및 폐수 네트워크 모델 구축, 시뮬레이션 및 분석 접근법 제공하며, 학습의 실질적인 특성을 강화하기 위해 엄선 된 사례의 다양한 예시된다. 실제 네트워크 모델링 상황을 표현함으로써, 통합 문서는 학생들이 공학 연습의 일상적인 문제 해결 작업을 숙지하기에 이상적이다.
"Innovyze는 엔지니어링 커뮤니티에 걸쳐 모두 교육과 연구의 기술적 성취와 기술 발전을 촉진하기 위해 최선을 다하고있다"폴 F. Boulos, 박사, BCEEM, Hon.D.WRE, Dist.D.NE, DIST는 말했다 Innovyze의 .M.ASCE, NAE 회장, 운영 책임자 (COO) 겸 최고 기술 책임자. "대학은 엄격한 예산에 직면 한 번에, 우리의 학생 소프트웨어 버전이 기관들은 최첨단 기술을 사용하여 학생들을 가르치고 보람 전문 경력을 위해 그들을 준비하는 데 필요한 도구를 제공합니다. 그것은 환경과 물 자원 공학 분야에 관심이있는 학생들이 매일 주요 물과 폐수 유틸리티와 진보적 인 컨설팅 엔지니어링 회사에서 사용하는 정교한 기술을 훈련 할 수 있습니다. 이것은 그들에게 매우 경쟁 우위를 제공하고 번성하도록하는 데 도움이됩니다. 또한 그들은, 우리의 물 인프라를 유지, 업계의 요구 사항을 충족 우리의 경제를 발전하고, 더 나은 세상을 구축하는 데 필요한 기술과를 준비합니다. "
Innovyze 정보 Innovyze 전 세계적으로 물 / 폐수 유틸리티, 정부 기관 및 엔지니어링 조직의 기술적 요구를 충족하도록 설계 젖은 인프라 비즈니스 분석 소프트웨어 솔루션을 제공하는 세계적인 선도 기업이다. 고객은 모두 5 개 대륙에서 가장 큰 영국, 호주, 동아시아와 북미의 도시, 일류 유틸리티의 대부분, 그리고 ENR 최상급 디자인 회사를 포함한다. 북미, 유럽 및 아시아 태평양 지역에서 최고의 전문 지식과 사무소, Innovyze는 수천 명의 엔지니어가 경쟁적으로 운영하고 매우 효율적이고 안정적인 인프라 시스템을 유지, 계획, 관리, 디자인을, 보호하기 위해 힘을 실어 최고 수준의 제품 라인의 포트폴리오를 연결 고객의 성공을위한 지속적인 플랫폼을 제공합니다. 자세한 내용은 +1 626-568-6868에서 Innovyze 전화, 또는 방문 www.innovyze.com을 .
Student Edition gratuite de l'Industrie InfoWater leader et InfoSWMM visant à donner aux étudiants mains sur l'expérience, mieux préparer la main-d'œuvre de l'industrie-Ready et Façonner l'avenir
Offres Innovyze libre Award-Winning SIG-Centric Software Modélisation de l'eau pour les universités du monde
Student Edition gratuite de l'Industrie InfoWater leader et InfoSWMM visant à donner aux étudiants mains sur l'expérience, mieux préparer la main-d'œuvre de l'industrie-Ready et Façonner l'avenir
Broomfield, Colorado, Etats-Unis, le 4 Août, ici à 2015
L'accomplissement de sa promesse d'augmenter continuellement la barre en matière d'éducation de l'eau de l'ingénierie des ressources et l'expansion du monde de l'apprentissage, Innovyze, un innovateur leader mondial de l'analyse d'affaires des logiciels et des technologies pour l'infrastructure hydraulique intelligente, a annoncé aujourd'hui la disponibilité de son eau de SIG-centric leader de l'industrie et un logiciel de modélisation des eaux usées gratuitement aux étudiants et aux professeurs établissements d'enseignement supérieur à travers le monde. Cette édition spéciale de l'étudiant à la fois InfoWater et InfoSWMM, limitée à soixante liens, est conçu pour fournir universités du monde entier un moyen simple, souple d'utilisation, logiciel avancé de haute performance de la modélisation de l'eau dans leurs salles de classe et les laboratoires. Il aidera les élèves à apprendre et à développer des compétences importantes dans la conception, la planification, l'exploitation et la gestion de la distribution de l'eau durable et de collecte des eaux usées systèmes / d'eaux pluviales qui les aideront à se démarquer dans le marché du travail.
Innovyze comprend que les étudiants de génie civil doivent être académiquement et professionnellement préparé pour une carrière en génie. Pour les étudiants et les professionnels, il n'y a pas de substitut à l'expérience pratique. Sachant cela, de plus en plus d'universités aident les élèves ont accès à des outils à la pointe de la technologie et pratiques utilisées dans la salle de classe, où et quand ils en ont besoin. En adaptant leurs premier et deuxième cycles autour de la technologie Innovyze, membres du corps professoral de l'ingénierie peuvent être assurés qu'ils aident leurs étudiants ont un accès direct aux outils puissants et plus récents progrès de la technologie de modélisation des ressources en eau intelligente ils ont besoin pour succeed- non seulement en classe, mais en fin de compte que des ingénieurs professionnels.
"Innovyze InfoWater et InfoSWMM logiciel est devenu un standard pour beaucoup des plus grands services d'eau et d'eaux usées dans le monde et principales firmes d'ingénierie», a déclaré Scott Yost, Ph.D., PE, professeur agrégé de génie civil de l'Université du Kentucky. "Je peux voir ce logiciel utilisé par les meilleures écoles d'ingénieurs. Les Analyse et Conception classeurs étudiants sont également excellentes. Ayant une formation et de l'éducation dans cette technologie essentielle à la mission est un atout majeur dans la validation de l'expertise de nos étudiants à des employeurs potentiels ainsi que de les préparer à une carrière enrichissante ".
Construit au sommet d'ArcGIS (ESRI, Redlands, Californie), InfoWater technologie de modélisation de réseau innovant de l 'aborde toutes les facettes de la gestion des infrastructures d'utilité et de protection - assure le plus haut taux de rendement dans l'industrie. Le logiciel intègre de façon transparente l'analyse prédictive sophistiqués, la dynamique des systèmes et des fonctionnalités d'optimisation directement dans le cadre de ArcGIS puissant. De flux de feu et des simulations dynamiques de qualité de l'eau, la vanne criticité et l'analyse des coûts de l'énergie à la gestion de la zone de pression et l'optimisation Algorithme Génétique et essaim de particules avancé, la suite est équipée d'utilité tout de l'eau propriétaires-exploitants ont besoin de mieux planifier, concevoir, exploiter, sécurisé et soutenir leurs systèmes de distribution.
InfoWater sert aussi de plate-forme de base pour les extensions de modélisation du réseau, l'exploitation, la planification des immobilisations et de gestion d'actifs intelligents avancés. Parmi ces applications critiques sont IWLive (opérations et la sécurité en temps réel); InfoWater UDF (rinçage unidirectionnel); CapPlan (planification du capital fondé sur le risque); InfoMaster et InfoMaster mobile (gestion de l'intégrité des actifs et évaluation de l'état); InfoWater MSX (multi-espèces modélisation); InfoWater BTX (événement / retour en arrière de particules); InfoSurge (surtension / d'analyse transitoire); Durabilité (calcul de l'empreinte carbone); BalanceNet optimisation (de gestion et d'exploitation de l'énergie en temps réel); PressureWatch (surveillance de l'intégrité hydraulique de réseau en temps réel); QualWatch (surveillance en temps réel de l'intégrité de la qualité de l'eau du réseau); SCADAWatch (en temps réel l'intelligence d'affaires et le suivi des performances); DemandWatch (eau prévision de la demande); et DemandAnalyst (la demande d'eau en temps réel et les estimations de cycle diurne).
En tant que solution complète de modélisation urbaine de drainage ArcGIS-centrique, le plein de fonctionnalités InfoSWMM analyse et programme de conception offre le plus haut taux de rendement dans l'industrie. Toutes les opérations d'un système d'égout typique - de l'analyse et de la conception aux fonctions de gestion telles que l'évaluation de la qualité de l'eau, la prévision de la pollution, le transport des sédiments et des dépôts, les inondations urbaines, contrôle en temps réel, et la tenue de dossiers - sont abordés dans un seul géoingénierie, entièrement intégré environnement. Puissant moteur de calcul hydraulique et qualité de l'eau Le programme est basé sur une version améliorée de la dernière SWMM 5.1.010, qui est approuvé par l'EPA et certifié par la FEMA. Ces fonctionnalités et plus offrent une expérience de modélisation améliorée et un plus grand réalisme des résultats affichés - avantages qui se traduisent par une productivité accrue, réduction des coûts, une plus grande précision, une meilleure efficacité, et de conceptions améliorées.
InfoSWMM sert également une plate-forme robuste pour la modélisation avancée, les questions opérationnelles, à court terme, à long terme et la planification des immobilisations, le traitement des eaux pluviales urbaines et d'analyse, et les extensions de gestion d'actifs d'analyse axée. Certaines de ces applications critiques comprennent InfoSWMM 2D (modélisation des inondations surface à deux dimensions), CapPlan (planification des fonds propres à risque et la modélisation de la performance des actifs), InfoSWMM Sustain (sélection optimale et le placement de couvercles / MPG), InfoSWMM SFEM (de l'estimation des flux d'égout dynamique modèle), InfoMaster (gestion d'actifs Analytics axée SIG-centric), et RDII analyste (écoulement et l'infiltration planification et l'analyse des précipitations-dépendant).
Une offre complète de conception de l'étudiant et de l'analyse classeur est également inclus pour chaque programme. En plus de la théorie de fond, les classeurs fournissent étape par étape les approches à l'eau et à la construction du modèle de réseau d'eaux usées, de simulation et d'analyse, et sont illustrés avec une variété d'études de cas soigneusement sélectionnés de renforcer le caractère pratique de l'apprentissage. En représentant des situations réelles de modélisation du réseau, les classeurs sont idéales pour les étudiants de se familiariser avec le travail au jour le jour la résolution de problèmes dans la pratique de l'ingénierie.
"Innovyze est déterminé à favoriser la réussite technique et le progrès technologique, tant dans l'enseignement et la recherche, dans toute la communauté de l'ingénierie», a déclaré Paul F. Boulos, Ph.D., BCEEM, Hon.D.WRE, Dist.D.NE, Dist .M.ASCE, NAE, président, chef de l'exploitation et chef de la direction technique de Innovyze. «À un moment où les universités sont confrontées à des budgets plus serrés, notre logiciel Student Edition offre à ces institutions les outils dont ils ont besoin pour enseigner à leurs élèves en utilisant la technologie state-of-the-art et de les préparer à des carrières professionnelles enrichissantes. Il permet aux étudiants qui sont intéressés dans le domaine de l'ingénierie des ressources de l'environnement et de l'eau pour former sur la technologie sophistiquée utilisée par les plus grands services d'eau et d'eaux usées et des entreprises de génie-conseil progressistes sur une base quotidienne. Cela leur donne un avantage concurrentiel imbattable et les aide à se développer. Il les prépare aussi avec les compétences dont ils ont besoin pour répondre aux demandes de l'industrie, de soutenir nos infrastructures de l'eau, faire progresser nos économies, et de construire un monde meilleur ".
Prix et disponibilité
Étudiant édition spéciale de InfoWater et InfoSWMM avec leur conception de l'étudiant et de l'analyse des classeurs sont disponibles pour télécharger gratuitement à partir du site Innovyze au http://www.innovyze.com/education/student/.
A propos de Innovyze Innovyze est un fournisseur leader mondial du commerce de l'infrastructure de solutions logicielles d'analyse humides conçus pour répondre aux besoins technologiques des services publics de l'eau / des eaux usées, des organismes gouvernementaux et des organisations d'ingénierie à travers le monde. Ses clients comprennent la majorité des plus grandes villes du Royaume-Uni, d'Asie et d'Amérique du Nord, de l'Est de l'Australasie, les services publics avant tout sur les cinq continents, et les entreprises de conception ENR top-rated. Avec une expertise inégalée et des bureaux en Amérique du Nord, Europe et Asie-Pacifique, l'Innovyze connecté portefeuille de lignes de produits best-in-class habilite milliers d'ingénieurs de planifier la concurrence, de gérer, de la conception, de protéger, exploiter et de gérer les systèmes d'infrastructure hautement efficaces et fiables, et fournit une plate-forme durable pour la réussite du client. Pour plus d'informations, appelez Innovyze au +1 626-568-6868, ou visitez www.innovyze.com.
Innovyze Contact: Rajan Ray Directeur du Marketing et du Service Client Manager
![SNAGHTML1652e7d3[4]](http://swmm5.files.wordpress.com/2015/09/snaghtml1652e7d34.png "SNAGHTML1652e7d3[4]")
